EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 147)

7.8.3. How To Go to and Select Cue Points
To go to a defined cue point:
• Press the cue point number on the keypad, and press ENTER.
To select a specific cue point:
• Click the cue point on the Media bar.
The cue point will turn purple when selected.
7.8.4. Contextual Menu for Cue Points
The contextual menu of the timecode bar gives in addition some options for the tags and
cue points, when they are selected.
To move the nowline to the cue point on which you have right-clicked, select the Snap
Nowline to Item command. You can also press the number corresponding to the cue
point on the keypad and validate with ENTER.
To move the cue point on which you have right-clicked to the nowline position, select the
Snap Item to Nowline command.
7.9. Extending or Shortening Clips
7.9.1. Introduction
It is possible to extend or to shorten the duration of a clip previously added to the edit, by
modifying the IN or OUT point. The material from the original media will be used to extend
the clip, if available. The Overwrite or Insert modes are taken into account in extend
actions.
This can be done in different ways:
• using one of the Extend editing buttons on the timeline: , ,
• dragging the media on the timeline itself.
USER MANUAL Xedio 4.35 Xedio CleanEdit
7. General Editing 131