EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 89)

Source material
Audio Channel Assignment of the A/V material based
on…
Media imported from
Media Importer … the Default Input Audio Track Assignment setting
defined in Xedio Manager (Software > Parameter Profiles >
General > Audio tab).
The user can modify the default assignment before importing
the A/V material in Media Importer, via the Setup, Audio
Channels Assignment tab.
Note
Once the audio track assignment has been defined in
Xedio Importer or AutoFile Importer, these values
will be used instead of the default ones on the
workstation.
Media ingested from
a Xedio encoder … the audio channels defined for the given channel of the
physical encoder. This is defined in Xedio Manager (Encoders
> Physical Manager > Encoder Channel Profile).
Clip imported from
an EVS server … the Default XT Input Audio Track Assignment setting
defined in Xedio Manager (Software > Parameter Profiles >
General > Audio tab).
The user can modify the default assignment before importing
the A/V material in Media Importer, via the Setup, Audio
Channels Assignment tab.
Note
Once the audio track assignment has been defined in
Xedio Importer or AutoFile Importer, these values
will be used instead of the default ones on the
workstation.
Record train of an
EVS server loaded
via the direct access
in CleanEdit … the audio type defined in the EVS server application
launched.
Possible Audio Configurations
The possible audio configurations are multiple and are a combination of mono, stereo
and/or 5.1 audio tracks, with a maximum of 16 channels.
Within the general settings of Xedio Manager, you need to check the Enable 5.1 tracks
parameter to allow the management of 5.1 tracks in the Xedio Suite, and the Enable
mono tracks parameter to allow the management of mono tracks.
When encoders ingest media, they only use stereo tracks.
When importing files with 2, 4, 8 or 16 audio channels, the assignment must follow the
default parameters set in the database, as explained in section here above. In case the
default assignments cannot be applied, all audio tracks will be considered as stereo pairs.
USER MANUAL Xedio 4.35 Xedio CleanEdit
6. Main Workspace for Editing 73