EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 201)

2. Tick the Source Channel check boxes corresponding to the tracks whose audio level
you want to adjust.
3. In the Level Adjust box corresponding to each track, select how many dbs you want
to add to or remove from audio level of the track.
4. Select the adjustment mode as follows:
5. If you want to apply the specified db value to the current audio level, tick the Relative
radio button.
6. If you want to apply the specified db value to the original audio level (0db), tick the
Absolute radio button.
7. Click OK.
The audio level of the whole track is adjusted according to the defined value and
adjustment mode.
USER MANUAL Xedio 4.35 Xedio CleanEdit
10. Advanced Audio Editing 185