How to make a clip – EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual User Manual
Page 87
Player
Field
Meaning
Mark IN TC
Timecode of the Mark IN defined on the
loaded media.
Mark OUT TC
Timecode of the Mark OUT defined on the
loaded media.
Nowline TC
Timecode of the nowline position on the
loaded media.
TC OUT of the loaded clip.
Duration from the IN point to the OUT point:
•
If the clip is loaded from the thumbnail
view, it displays the duration of the
source clip.
•
If the clip is loaded from the storyboard,
it displays the duration of the
storyboard clip.
To move the mark IN, mark OUT or nowline to a given TC, type the timecode in the
corresponding field and press ENTER.
You can edit hours, minutes, seconds or frames separately in the timecode fields:
•
Double-click on the hours, minutes, seconds or frames area, and the corresponding
area will be activated for editing.
•
Simple-click in the timecode field, the cursor should blink on the right and you can type
the full timecode value.
How to Make a Clip
Using the transport controls listed above, you can create a clip as follows:
1. Select the requested media from the Media zone and double-click on it or drag it to the
Player area. It will open in the Player.
2. Play the media using the transport control commands described on page "Transport
Commands in the Player" on page 67.
3. Position the nowline at the requested position for the Mark IN point and click the Mark
IN button
.
4. Position the nowline at the requested position for the Mark OUT point and click the
Mark OUT button
.
5. Enter a name in the Clip Name field.
USER MANUAL Xedio 4.35 Xedio CleanEdit
6. Main Workspace for Editing
71