EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 160)

When you right-click… The transition effect will be applied to…
near the IN or OUT point of a clip the transition nearest to the mouse cursor.
between a defined mark IN and mark OUT all the transitions between the marks.
This will give you access to the contextual menu and to the (Left/Right) Video
Transition commands.
You can also remove the previously defined transition effects clicking the Clear All sub-
command in the contextual menu.
See section "How to Apply Video Transition Effects Manually" on page 144 for more
information on how to define the transition effects.
See section "Possible Video Transition Effects" on page 146 for more information on the
various types of transition effects.
8.2.2. How to Modify the Default Video Transition
Effect
The default transition is defined in Xedio Manager: Software > Parameter Profiles >
(Xedio)CleanEdit > Timeline tab: DefaultVideoTransFx.
However, you can modify the default video transition effect as follows:
1. Right-click the icon and select Properties.
The Video Transition Effect window is displayed.
2. Specify the requested default transition effect
3. Click OK.
The new transition effect is now the default transition associated with your user profile.
8.2.3. How to Apply Video Transition Effects
Manually
To apply video transition effects to one or several transitions, proceed as follows:
1. Select the transitions where to apply the effects in one of the following ways:
◦ To define an effect on a single transition, position the mouse cursor next to the
video transition on which you want to add the effect.
◦ To define an effect on several transitions, add a mark IN and mark OUT beyond
the relevant transitions.
2. Do one of the following:
◦ Right-click to access the contextual menu and select the requested effect type in
the (Left / Right) Video Transition command.
144 8. Advanced Video Editing
EVS Broadcast Equipment SA Issue 4.35.B - August 2013