ZyXEL Communications NetAtlas Workgroup - Manual (Page 96)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 10 Maintenance 96
This may take up to two minutes. If you want to access the switch web configurator
again, you may need to change the IP address of your computer to be in the same subnet
as that of the default switch IP address.
4 Click Close to close this screen.
Figure 60 Maintenance: Load Factory Defaults
10.5 Scheduled Network Element Configuration Backup
Perform configuration backups according to a schedule. Set the frequency, time and date of the
backup and the location where you want to backup the configuration file.
Click Maintenance > Scheduled NE Config Backup to display the configuration screen as
shown.
Figure 61 Maintenance: Scheduled NE Config Backup
The following table describes the labels in this screen.