ZyXEL Communications NetAtlas Workgroup - Manual (Page 140)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 16 Ethernet Port Configuration 140
C
H A P T E R
16
Ethernet Port Configuration
This chapter shows how to configure the Ethernet port settings.
16.1 Overview
Use the Ethernet Port Configuration screens to set port-related settings (such as port VLAN,
STP and security, etc.).
Once you configure a feature on a port, you must enable that feature on the switch in the
Switch Setup screen.
16.2 Port Setup
Use the Port Setup screen to activate and configure switch port parameters.
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration > Ethernet Port > Port Setup.
3 Select a device and the ports to which you want to apply this configuration.
Figure 93 Ethernet Port Configuration: Port Setup