ZyXEL Communications NetAtlas Workgroup - Manual (Page 95)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
95 Chapter 10 Maintenance
5 Select Backup to save the configuration to your computer. Or select Restore to restore
the configuration file back to the switch.
6 Click Apply.
7 If you chose Restore, the switch automatically restarts when the configuration file upload
is complete.
8 Click Close to close this screen.
Figure 59 Maintenance: Configuration Backup/Restore
The following table describes the labels in this screen.
10.4 Load Factory Default
Follow the steps below to reset a switch configuration to the factory defaults.
1 Click Maintenance > Load Factory Default.
2 Select a switch from the list of devices shown.
3 Click Apply to clear all configuration information and return the switch to the factory
defaults.
Table 42 Maintenance: Configuration Backup/Restore
LABEL DESCRIPTION
Directory/File Name Type the path and file name of the configuration file you wish to restore to the
switch or backup to your computer in the Directory / File Name text box or
click Browse to locate it.
Save running-config to
configuration
Select the Save running-config to configuration text box to save the most
recently updated configuration to a file specified in the Directory/File Name
field.
Backup Click the Backup radio button to transfer the configuration file from your switch
to a computer.
Restore Click the Restore radio button to transfer the configuration file from your
computer to a switch.
Apply Click Apply to backup or restore the switch(es) configuration file.
Close Click Close to close this screen.