ZyXEL Communications NetAtlas Workgroup - Manual (Page 128)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 14 Switch Configuration 128
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration > Switch Configuration > Filtering to display the following
screen.
Figure 84 Switch Configuration: Filtering
The following table describes the labels in this screen.
14.6.1 Creating a New Filter
To create a new filter, click Add in the Filtering screen. A configuration screen displays as
shown.
Table 60 Switch Configuration: Filtering
LABEL DESCRIPTION
Index This field displays the index number.
Active This field displays whether the filter is enabled (Yes) or not (No).
Name This field displays the descriptive name for this filter.
MAC Address This field displays the MAC address of a device whose traffic is forwarded or blocked.
VID This field displays the ID of the VLAN group to which the MAC address belongs.
Action This field displays the action on the matching packets.
Add Click Add to create a new filter.
Delete Click Delete to remove the selected filter.