ZyXEL Communications NetAtlas Workgroup - Manual (Page 188)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Appendix A 188
Appendix A
SNMPc Network Manager
This appendix gives a brief overview of the SNMPc Network Manager.
Starting the SNMPc Network Manager
You must have SNMPc properly installed before you can use the EMS; please refer to the
Castle Rock web site at
www.castlerock.com or see your SNMPc user's guide.
You may start the SNMPc Network Manager manually or automatically each time you turn on
your computer.
Manual Startup
Click Start, Programs, SNMPc, Startup System to manually start the SNMPc network
manager. This is the default location of the SNMPc network manager.
Automatic Startup
To automatically start the SNMPc network manager each time you turn on your computer:
1 In SNMPc main window, click Config, System Startup.
2 Select the Auto Startup check box and click Done.
Figure 133 Automatic Startup