1 configuring an 802.11q vlan – ZyXEL Communications NetAtlas Workgroup User Manual
Page 136
NetAtlas Workgroup Ethernet Switch Manager User’s Guide
Chapter 15 VLAN
136
15.2.1 Configuring an 802.11Q VLAN
Ports are assigned membership in a VLAN by associating a VLAN ID with the ports.
In the VLAN Configuration screen, click New or Modify to display the setup screen.
Figure 91 VLAN Configuration: 802.1Q: New or Modify
Modify
Click on a VLAN in the left-hand column of this screen. Change the VLAN ID, VLAN
Name or change the configuration of the egress, forbidden and untagged ports. Click
the Modify button to save the changes.
Load Template
Use a VLAN template to overwrite existing selected VLANs. Select one or more
VLANs and click the Load Template button. See
for more
information.
Port List
Click on a port in the Egress Ports list to add the selected port to the port list. If a
port is not selected from any of the three port lists, then it is a normal tagged port.
Refer to
for the VLAN port type descriptions.
Close
Click Close to close the screen.
Table 65 VLAN Configuration: 802.1Q (continued)
LABEL
DESCRIPTION