ZyXEL Communications NetAtlas Workgroup - Manual (Page 179)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
179 Chapter 18 IP Configuration
18.6.2 Configuring a VRRP Interface
1 In the Device Panel list, right-click on a device.
2 Click Configuration > IP Configuration > VRRP.
Figure 127 IP Configuration: VRRP: New
Index This field displays the index number of an entry.
Active This field shows whether a VRRP entry is enabled (Yes) or disabled (No).
Name This field displays a descriptive name of an entry.
Network This field displays the IP address and subnet mask of an interface.
VRID This field displays the ID number of a virtual router.
Primary VIP This field displays the IP address of the primary virtual router.
Uplink
Gateway
This field displays the IP address of the uplink gateway.
Priority This field displays the priority level (1 to 255) of the entry.
Add Click Add to create a new VRRP interface.
Modify Click Modify to change the settings of the selected VRRP interface.
Delete Click Delete to remove the selected VRRP interface.
Table 96 IP Configuration: VRRP (continued)
LABEL DESCRIPTION