ZyXEL Communications NetAtlas Workgroup - Manual (Page 71)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
71 Chapter 6 Template
6.3.1 Configuring an IGMP Filter Template
Click New/Add in the IGMP Filtering Template screen to display the screen as shown.
Figure 35 Template: New IGMP Filter
The following table describes the labels in this screen.
IGMP Filter
Parameters
This table displays the settings of the selected IGMP filter above.
Index This is the number of the IGMP filter profile.
Start IP This field displays the starting multicast IP address for a range of multicast IP addresses
to which you want this IGMP filter profile to allow access.
End IP This field displays the ending multicast IP address for a range of IP addresses to which
you want this IGMP filter profile to allow access.
OK Click OK to save your changes.
Table 31 Template: IGMP Filter Template (continued)
LABEL DESCRIPTION
Table 32 Template: New IGMP Filter
LABEL DESCRIPTION
IGMP Filter Name Type a name (up to 31 printable characters) to identify the IGMP filter profile.
Start Address Enter the starting multicast IP address for a range of multicast IP addresses to
which you want this IGMP filter profile to allow access.