1 device firmware versions supported, 3 netatlas workshop installation, 4 accessing ems – ZyXEL Communications NetAtlas Workgroup User Manual
Page 25: 3 ems installation 1.4 accessing netatlas, Figure 1 snmpc: switch device list icon, Table 2 device firmware versions supported

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
25
Chapter 1 Introduction
1.2.1 Device Firmware Versions Supported
The EMS supports the devices and device firmware versions as listed in the following tale.
1.3 NetAtlas Workshop Installation
Refer to the Quick Start Guide for the installation procedure.
1.4 Accessing EMS
Follow the steps below to access EMS.
1 In the SNMPc main screen, double-click the switch icon.
Figure 1 SNMPc: Switch Device List Icon
2 Click the Switch Manager icon to display the main EMS screen.
Screen Resolution: 1024x768 pixels
Ethernet Adaptor: 10/100 Mbps
Table 1 System Requirements (continued)
HARDWARE
SOFTWARE
Table 2 Device Firmware Versions Supported
MODEL
FIRMWARE VERSION
ES-2108
360ABK1C0 or later versions
ES-2108G
360ABL1C0 or later versions
ES-2024A
360TX1C0 or later versions
GS-2024
360LT0C0 or later versions
ES-3124
360TP1C0 or later versions
ES-3124PWR
360TY1C0 or later versions
GS-4012F
360TS2C0 or later versions
GS-4024
360LL2C0 or later versions