ZyXEL Communications NetAtlas Workgroup - Manual (Page 61)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
61 Chapter 5 View
Figure 28 View: IP Application Status: Routing Table Status
The following table describes the labels in this screen.
5.7.2 IP Table Status
Follow the steps below to view the IP table of a selected device.
1 Click View > IP Application Status.
2 Select a switch from the list located on the left-hand side of the screen.
3 Click the IP Table Status tab.
Table 25 View: IP Application Status: Routing Table Status
LABEL DESCRIPTION
Index This field displays the index number.
Destination This field displays the destination IP routing domain.
Gateway This field displays the IP address of the gateway device.
Interface This field displays the IP interface to which this route belongs.
Metric This field displays the cost of the route.
Type This field displays the method used to learn the route.
Polling The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking the Apply
button.
Close Click Close to close the screen.