ZyXEL Communications NetAtlas Workgroup - Manual (Page 177)

NetAtlas Workgroup Ethernet Switch Manager User’s Guide
177 Chapter 18 IP Configuration
Figure 125 IP Configuration: DHCP: Relay
The following table describes the labels in this screen.
18.6 VRRP
Virtual Router Redundancy Protocol (VRRP), defined in RFC 2338, allows you to create
redundant backup gateways to ensure that the default gateway of a host is always available.
Table 95 IP Configuration: DHCP: Relay
LABEL DESCRIPTION
Active Select this check box to enable DHCP relay.
Remote DHCP
Server 1 .. 3
Enter the IP address of a DHCP server in dotted decimal notation.
Relay Agent
Information
Select the Option 82 check box to have the switch add information (slot number, port
number and VLAN ID) to client DHCP requests that it relays to a DHCP server.
Information This read-only field displays the system name you configure in the System
Information screen (refer to Section 14.1 on page 120 ).
Select the check box for the switch to add the system name to the client DHCP
requests that it relays to a DHCP server.
Apply Click Apply to save the changes.