Toshiba VF-FS1 - Manual (Page 50)

E6581381
C-4
3
3.1.2 How to set the frequency
■ Example of a HOQF setting procedure
Key operated LED display Operation
Displays the operation frequency (operation stopped).
(When standard monitor display selection H= [Operation
frequency])
CWH Displays the first basic parameter [Wizard function (CWH)].
HOQF Press either the key or key to select “HOQF”.
Press ENT key to display the parameter setting. (Default setting: ).
Change the parameter to (Operation panel) by pressing the key.
 ⇔HOQF
Press the ENT key to save the changed parameter. HOQF and the
parameter set value are displayed alternately.
* Pressing the key twice returns the display to standard monitor mode (displaying operation frequency).
(1) Setting the frequency using the operation panel (HOQF=)
Set the frequency with the operation panel..
: Moves the frequency up : Moves the frequency down
■ Example of operating a run from the panel
Key operated LED display Operation
Displays the operation frequency.
(When standard monitor display selection H= [Operation
frequency])
Set the operation frequency.
⇔HE
Press the ENT key to save the operation frequency. HE and the
frequency are displayed alternately.
Pressing the key or the key will change the operation frequency
even during operation.
MODE
ENT
ENT
MODE
ENT