Toshiba VF-FS1 - Manual (Page 220)

E6581381
K-12
11
Title
Communication
No.
Function Unit
Minimum
setting unit
Panel/Commun
ication
Adjustment range
Default
setting
User
setting
Reference
H 0734 Prohibition of
panel emergency
stop operation - - 0: Permitted
1: Prohibited 0 6.20.1
H 0735 Prohibition of
panel reset
operation - - 0: Permitted
1: Prohibited 0
H 0738 Head of
parameter display
selection - - 0: AUF
1: AUH 0 6.20.7
H 0748 Integral output
power retention
selection - - 0: Disabled
1: Enabled 1 6.20.8
H 0749 Display unit
selection for
integral output
power - - 0: 1=1kWh
1: 0.1=1kWh
2: 0.01=1kWh
3: 0.001=1kWh *1
*1 : Default values vary depending on the capacity. ⇒ See the table of page K-14.
• Communication parameters
Title
Communication
No.
Function Unit
Minimum
setting unit
Panel/Commun
ication
Adjustment range
Default
setting
User
setting
Reference
H 0800 Communication
rate - - 0: 9600bps
1: 19200bps 1
H 0801 Parity - - 0: NON (No parity)
1: EVEN (Even parity)
2: ODD (Odd parity) 1
H 0802 Inverter number - 1/1 0-247 0
H 0803 Communication
error trip time s 1/1 0: Disabled
1-100 0
H 0805 Communication
waiting time s 0.01/0.01 0.00: Regular communication
0.01-2.00 0.00
H 0806 Setting of master
and slave for
communication
between inverters - - 0: Slave (0 Hz command issued in
case the master inverter fails)
1: Slave (Operation continued in case
the master inverter fails)
2: Slave (Emergency stop tripping in
case the master inverter fails)
3: Master (transmission of frequency
commands)
4: Master (transmission of output
frequency signals)
0
6.21
H 0811 Communication
command point 1
setting % 1/1 0-100 0
H 0812 Communication
command point 1
frequency Hz 0.1/0.01 0.0-200.0 0.0
H 0813 Communication
command point 2
setting % 1/1 0-100 100
H 0814 Communication
command point 2
frequency Hz 0.1/0.01 0.0-200.0 50.0 (WP)
60.0 (WN)
6.5.2
6.21
H 0829 Selection of
communication
protocol - - 0: Toshiba inverter protocol
1: ModbusRTU protocol
2: Metasys N2 protocol
3: APOGEE FLN protocol
4: BAC-net protocol 0 6.21