Toshiba VF-FS1 - Manual (Page 219)

E6581381
K-11
11
• Output parameters
Title
Communication
No.
Function Unit
Minimum
setting unit
Panel/Commun
ication
Adjustment range
Default
setting
User
setting
Reference
H 0691 Inclination
characteristic of
analog output - - 0: Negative inclination (downward
slope)
1: Positive inclination (upward slope)
1 6.19.1
H 0692 Bias of analog
output % 1/1 0－100 0
• Operation panel parameters
Title
Communication
No.
Function Unit
Minimum
setting unit
Panel/Commun
ication
Adjustment range
Default
setting
User
setting
Reference
H 0700 Prohibition of
parameter change - - 0: Permitted
1: Prohibited 0 6.20.1
H 0701 Current/voltage
display mode - - 0: %
1: A (ampere)/V (volt) 0 6.20.2
H 0702 Frequency free
unit magnification Times 0.01/0.01 0.00: Free unit display disabled
(display of frequency)
0.01-200.0
0.00
H 0705 Inclination
characteristic of
free unit display - - 0: Negative inclination (downward
slope)
1: Positive inclination (upward slope)
1
H 0706 Bias of free unit
display Hz 0.01/0.01 0.00-HJ 0.00
6.20.3
H 0707 Free step 1
(pressing a panel
key once) Hz 0.01/0.01 0.00: Disabled
0.01-HJ 0.00
H 0708 Free step 2 (panel
display) - 1/1 0: Disabled
1-255 0
6.20.4
H 0710 Standard monitor
display selection - - 0: Operation frequency (Hz/free
unit/step)
1: Frequency command (Hz/free
unit/step)
2: Output current (%/A)
3: Inverter rated current (A)
4: Inverter load factor (%)
5: Output power (kW)
6: Frequency command after PID
control (Hz/free unit/step)
7: Optional item specified from an
external control unit
8: Output speed
9: Communication counter
10: Normal state communication
counter
0 6.20.5
H 0721 Selection of
operation panel
stop pattern - - 0: Slowdown stop
1: Coast stop 0 6.20.6
H 0730 Prohibition of
frequency setting
on the operation
panel (HE) - - 0: Permitted
1: Prohibited 0 6.20.1
H 0732 Prohibition of
panel local/remote
operation
(LOC/REM key) - - 0: Permitted
1: Prohibited 0
H 0733 Prohibition of
panel operation
(RUN/STOP keys) - - 0: Permitted
1: Prohibited 0