Renesas REJ10J1837-0100 - Manual (Page 425)

High-performance Embedded Workshop 7. Symbol File Format
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
410
7. Symbol File Format
In order for High-performance Embedded Workshop to be able to understand and decode the symbol file correctly, the
file must be formatted as a Pentica-B file:
1. The file must be a plain ASCII text file.
2. The file must start with the word “BEGIN”.
3. Each symbol must be on a separate line with the value first, in hexadecimal terminated by an “H”, followed by
a space then the symbol text.
4. The file must end with the word “END”.
Example:
BEGIN
11FAH Symbol_name_1
11FCH Symbol_name_2
11FEH Symbol_name_3
1200H Symbol_name_4
END
Note:
Support for this function depends on the debugger.