Renesas REJ10J1837-0100 - Manual (Page 150)

High-performance Embedded Workshop 7. Version Control
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
135
Other types of files can also be supported once they are added to the project.
• Version Control System that can be Connected with the High-performance Embedded Workshop
High-performance Embedded Workshop does not provide the version control system itself. It must be installed in your
PC in advance. The High-performance Embedded Workshop can be connected to the version control system via the
GUI interface.
First, select a version control system, which you wish to connect with the High-performance Embedded Workshop.
Either of the followings can be selected:
Type Version Control System
Name Displayed on Screen Description
Version control by custom settings Custom VCS Any version control system in which command-line commands
should be executed via the MS-DOS command prompt (such as
RCS , CVS , or PVCS). The commands in the version control
system must be defined as being associated with the GUI
interface of the High-performance Embedded Workshop.
Version control by Microsoft® Visual
SourceSafe 5.0, 6.0 and 2005 Microsoft Visual SourceSafe Microsoft® Visual SourceSafe 5.0, 6.0 and 2005. Main features
are already defined.
7.1 Selecting a Version Control System
The [Tools -> Version Control] sub-menu contains eight menu options but only the [Tools -> Version Control ->
Select] option is initially available. This is because a version control system is not yet active for the current workspace.
To select a version control system
1. Select [Tools -> Version Control -> Select]. The Select Version Control System dialog box opens, which
lists all of the supported version control systems.
2. Select the desired version control system from the Version control system list.
3. Click on the OK button.
• Once the "Custom VCS" is selected as a version control system, the [Tools -> Version Control -> Configure]
option will become available. See Chapter 8, Using the Custom Version Control System.