Renesas REJ10J1837-0100 - Manual (Page 281)

High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
266
Enable all: Selects all standard library functions.
Disable all: Does not select all standard library functions. Note that only the minimum required
functions, runtime and new, are selected.
To move to Step 5, click the Next> button in Step 4.
5. Specify the stack area in Step 5. This is done by setting the initial value of the stack pointer and the stack size. The
initial value of the stack areas depends on the CPU selected in Step 1.
Note:
The stack area is defined by stacksct.h which is generated by the High-performance Embedded Workshop. If stacksct.h
has been modified by an editor, it cannot be modified from [Project -> Edit Project Configuration] in the High-
performance Embedded Workshop.
To move to Step 6, click the Next> button in Step 5.