Procedure 2, Displaying cac parameters for one or more zones – Nortel Networks NN43001-314 User Manual
Page 85
Adaptive Network Bandwidth Management
85
Procedure 2
Displaying CAC parameters for one or more zones
Step
Action
1
Select IP Network > Zones from the navigator.
The Zones web page opens (see
2
Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page opens, as
shown in
Figure 15 "Maintenance Commands for Zones web
. This page lists all the configured zones and their
intrazone statistics by default.
3
Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRT ZCAC) from the Action drop-down list.
4
Select a zone from the Zone Number drop-down list, by doing one
of the following:
•
Select ALL to print statistics for all zones.
•
Select a specific zone number to display statistics for a specific
zone.
5
Click Submit.
The Maintenance Commands for Zones web page reopens,
displaying the statistics for the specified zone or zones. A blank
field indicates that statistic is either not available or not applicable to
that zone.
Figure 22 "Element Manager - CAC parameters" (page 86)
shows
an example of the CAC parameters for all Zones.
—End—
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.