Nortel Networks NN43001-314 - Manual (Page 65)

Configuring Bandwidth Management parameters 65
— Interzone Bandwidth = maximum bandwidth usage allowed
between peer Call Servers
• Call Server zones that will be used for Virtual Trunks with the
following properties:
— Intrazone Preferred Strategy = Best Quality (BQ)
— Intrazone Bandwidth = default (1000000)
— Interzone Preferred Strategy = Best Bandwidth (BQ)
— Interzone Bandwidth = default (1000000)
3 Configure the IP Phone, DSP and Virtual Trunk data with the
corresponding zone numbers.
For example, for an IP Phone 2004 telephone in zone 8
LD 11
REQ NEW
TYPE 2004P1, 2004P2
...
ZONE 8
...
—End—
Configuration using CS 1000 Element Manager
Zones are configured from the Zones web page, shown in Figure 14 "Zones
web page" (page 66) .
Refer to "Element Manager Branch Office zone configuration" (page 260) for
instructions on configuring a Network Bandwidth Management zone, using
the values given on
"Configuring Bandwidth Management" (page 64) .
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.