Nortel Networks NN43001-314 - Manual (Page 285)

Using the IP Phones 285
b. Use the navigation keys to highlight Virtual Office Logout.
See Figure 108 "Virtual Office application menu" (page 285) .
Figure 108
Virtual Office application menu
c. Press the Select soft key.
—End—
Feature interactions between Branch User and Virtual Office
logins
When an MG 1000B IP Phone user travels to the main office or another
network location, the user can access their own Main Office TN from an
IP Phone at the visited location by using the Virtual Office feature. The
IP Phone at the Branch Office is forced to log out after the Virtual Office
feature is activated.
If the IP Phone has been forced- to log out, the Virtual or Branch User soft
key shows on the IP Phone display area (see
Figure 109 "Virtual or Branch
soft key display" (page 285) ). The IP Phone is not operational in this mode.
The user must log in to bring the IP Phone back into service.
Figure 109
Virtual or Branch soft key display
The Virtual and Branch soft keys are provided to reset the IP Phone to
operational:
1. Press the Branch soft key to register the IP Phone to the main office.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.