Nortel Networks NN43001-314 User Manual
Page 201
201
Converting a Small System to a Branch
Office
Contents
This section contains information on the following topics:
"Implementation summary" (page 203)
Introduction
Customers with a CS 1000M installed base can re-configure existing
satellite Small System to function as Branch Offices. This configuration
allows customers to incorporate systems that were previously stand-alone
into a Branch Office network.
Where no main office exists, one office can be configured as the main office,
and the others converted to branch offices. Alternatively, if a main office
already exists, each of the other offices can be converted to a Branch Office
and associated with that main office. Therefore, customers with a number
of Small Systems can obtain the advantages of the Branch Office feature
without replacing their existing hardware.
Once a Small System has been converted to a Branch Office, it cannot
revert directly back to a stand-alone system.
Requirements
Any system can be configured as a main office, as listed in
hardware description" (page 28)
.
The following Small Systems can be converted to a Branch Office:
•
single-cabinet Meridian 1 Option 11C/Meridian 1 PBX 11C Cabinet
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.