Nortel Networks NN43001-314 User Manual
Page 322
322
Emergency Services configuration
Prompt
Response
Description
DMI is only prompted when the Directory Number Expansion
(DNXP) package 150 is equipped and SDRR = LDID.
The maximum number of Digit Manipulation tables is defined
by prompt MXDM. DMI is not prompted if route TKTP = ADM.
DEL
(0)-19
Number of leading digits to be deleted
INST
x
…
x
Insert. Up to 31 leading digits can be inserted.
CTYP
Call type to be used by the manipulated digits. This call type
must be recognized by the far-end switch.
2. Configure the Route List Index in LD 86 with the RLB feature.
LD 86 Configure Route List Index.
Prompt
Response
Description
REQ
NEW
Add new data.
CUST
xx
Customer number as defined in LD 15
FEAT
RLB
Route List data block
…
RLI
Route List Index to be accessed
0-127
0-255
0-999
CDP and BARS
NARS
FNP
ENTR
0-63
0-6
X
Entry number for NARS/BARS Route List
Route List entry number for CDP
Precede with X to remove
LTER
NO
Local Termination entry
ROUT
Route number
0-511
Range for Large System and CS 1000E system
0-127
Range for Small System and Media Gateway 1000B
DMI
(0)-999
Digit Manipulation Index number, as previously defined in LD
86, FEAT = DGT (
3. Configure the ESN Special Number and Digit Manipulation
in LD 90.
LD 90 Configure ESN Special Number and Digit Manipulation.
Prompt
Response
Description
REQ
NEW
Add new data.
CUST
xx
Customer number as defined in LD 15
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.