Nortel Networks NN43001-314 - Manual (Page 155)

Maintenance 155
Maintenance
Command Line Interface maintenance
LD 117 - Enable and disable Alternative Call Routing for NBWM for a zone.
Command Description
ENL ZALT Enable Alternative Call Routing for Bandwidth Management for
zone specified.
DIS ZALT Disable Alternative Call Routing for Bandwidth Management for
zone specified.
ENL ZBR [ALL] [LOC][ESA][TIM][ALT] Enable features for the Branch Office zone. If
you do not input features, then all are enabled.
DIS ZBR [ALL] [LOC][ESA][TIM][ALT] Disable features for the Branch Office zone. If you do not
input features, then all are disabled.
The system responds with ok, if operation is successful.
LD 117 - Change and Print Zone Alarm Suppression Time Interval.
Command Description
CHG ZAST
Change Suppression Time Interval for QoS alarms related to
Alternative Call Routing for NBWM feature for zone specified. Time
Interval is measured in seconds from the time the last alarm was
printed.
Default is 0. Range is 0 - 3600 seconds.
PRT ZAST Print Suppression Time Interval for QoS alarms related to Alternative
Call Routing for NBWM feature for zone specified. No entry for zone
number results in printout for all zones.
Sample printout:
# Alarms Suppression Time
10 50
11 0
12 1000
Where # is the column header for zone number.
Element Manager maintenance
Enable a zones Branch Office behavior
You can configure the Alternative Call Routing for NBWM feature while you
configure the zone’s Branch Office behavior.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.