Using the ip phones – Nortel Networks NN43001-314 User Manual
Page 281
Using the IP Phones
281
3
(Optional) Disallow usage of Virtual Office. For more information
on the Virtual Office feature, refer to Features and Services
Fundamentals (NN43001-106-B1).
LD 11 Enable/disable Virtual Office (optional).
Prompt
Response
Description
REQ:
NEW CHG
Add new data, or change existing data.
TYPE:
a...a
Terminal type.
Type
?
for a list of possible responses.
CLS
(VOLA)
VOLD
Allow Virtual Office operation from this TN.
Deny Virtual Office operation from this TN.
CLS
VOUA
Allow Virtual Office login onto this TN using other
telephone (destination of Virtual Office login).
(VOUD)
Deny Virtual Office login onto this TN using other
telephone (destination of Virtual Office login).
4
Provision the Station Control Password (SCPW) if the Virtual Office
feature is desired in Local Mode due to LAN/WAN or main office
failure. See
Procedure 11 "Setting and changing the Station Control
Password Configuration" (page 216)
.
5
Perform a manual or automatic installation of the MG 1000B
IP Phone according to instructions in IP Phones Fundamentals
(NN43001-368).
WARNING
After all telephones are installed, perform a datadump
(using LD 43 or NRS Manager) on the MG 1000B Call
Server. Refer to the Communication Server 1000E:
Installation and Configuration NTP (NN43041-310).
6
Test the IP Phones for survivability using
telephone for survivability" (page 278)
—End—
Using the IP Phones
An MG 1000B IP Phone is operational immediately after configuration. You
can learn more about its services by referring to
and to IP Phones Fundamentals (NN43001-368). You can also test the
telephone. Refer to
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.