Nortel Networks NN43001-314 - Manual (Page 367)

Trunk models 367
Route Type
Access
Code Mode Interface
51 FEX 7151 ICT -
52 FEX 7152 OGT -
Trunk routes marked with an asterisk (*) are configured to support Call
Detail Recording (CDR) output. CDR is pre-configured in LD 16 as follows:
CDR YES
INC YES
OAL YES
AIA YES
System parameters
Table 37 "System parameters" (page 367) provides the default system
parameter values for the system.
Table 37
System parameters
Parameter Value
Low Priority Input Buffers (LPIB) 450
High Priority Input Buffers (HPIB) 450
Number of Call Registers (NCR) 300
Multiple Appearance Redirection Prime (MARP) feature allowed YES
Refer to "Capacity Engineering" in Communication Server 1000S: Planning
and Engineering (NN43031-220) for further information on buffer sizes.
The preprogrammed data also include virtual superloops 96, 100, 104,
108, and 112.
Customer data
The default customer number used in the preprogrammed data is zero (0).
Trunk models
Do not use the DIP Class of Service for Model 19 of TIE trunk mode. The
correct Class of Service for model 19 of TIE trunk mode is DTN.
All trunks are programmed as immediate start/
supervision = YES, with the exception of trunks with an asterisk (*). Trunks
marked with an asterisk (*) are set for wink start/
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.