Nortel Networks NN43001-314 User Manual
Page 291
291
Dialing plan configuration
Contents
This section contains information on the following topics:
"Bandwidth management zones" (page 295)
"Zone-based digit manipulation" (page 295)
"CLID verification" (page 297)
"Configuring the dialing plan for PSTN access to Branch Users in Normal Mode"
(page 297)
"Preparing to configure the dialing plan" (page 297)
"Configuring the dialing plan" (page 298)
"Dialing plan configuration using Element Manager" (page 311)
"Testing PSTN access using an MG 1000B IP Phone" (page 312)
Overview
Configuring the Branch Office dialing plan is done in two stages:
•
configuring on-net dialing
•
configuring off-net dialing for access to the PSTN
For on-net calls, the configuration of the dialing plan in the main office and
Branch Office is the same as for other CS 1000 Release 5.0 configurations.
The same is true for off-net calls made by non-Branch Users in the main
office, and by users of TDM telephones and IP Phones in Local Mode in
the Branch Office.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.