Nortel Networks NN43001-314 User Manual
Page 302
302
Dialing plan configuration
a. Configure the DMI in LD 86 with the DGT feature.
LD 86 Configure the Digit Manipulation Index at the main office.
Prompt
Response
Description
REQ
NEW
Add new data.
CUST
xx
Customer number as defined in LD 15.
FEAT
DGT
Digit manipulation data block
DMI
1-999
Digit Manipulation Index numbers
The maximum number of Digit Manipulation tables is defined at
the MXDM prompt in LD 86.
DEL
(0)-19
Number of leading digits to be deleted, usually 0 at the main
office.
INST
x
…
x
Insert. Up to 31 leading digits can be inserted, usually none at
the main office. Default is none.
ISPN
IP Special Number
(YES)
NO
For off-net calls
For on-net calls
CTYP
Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical for
correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES, the
CLID is based on the call type before digit manipulation.
SPN
LOC
For off-net calls (ISPN=YES)
For on-net calls (ISPN=NO)
b. Configure the RLI in LD 86 with the RLB feature.
LD 86 Configure Route List Index.
Prompt
Response
Description
REQ
NEW
Add new data.
CUST
xx
Customer number as defined in LD 15
FEAT
RLB
Route List data block
RLI
Route List Index to be accessed
0-127
0-255
0-999
CDP and BARS
NARS
FNP
ENTR
0-63
X
Entry number for NARS/BARS Route List
Precede with x to remove
LTER
NO
Local Termination entry
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.