Nortel Networks NN43001-314 - Manual (Page 36)

36 Overview
When configuring the NRS it is necessary to enable the NCS. Ensure the
check box "Network Connection Server enabled" is checked in the NRS
configuration window of CS 1000 Element Manager.
For information on configuring the NRS, refer to IP Peer Networking
Installation and Commissioning (NN43001-313) .
Telephones
The Branch Office feature supports the following telephones:
• Nortel IP Phone 2001
• Nortel IP Phone 2002
• Nortel IP Phone 2004
• Nortel IP Phone 2007 — configured as IP Phone 2004. In CS 1000
Release 5.0, IP phone 2007 can be configured as itself.
• IP Phone Key Expansion Module (KEM)
• WLAN Handset 2210/2211/2212
• Analog (500-2500 type) and digital telephones
• Nortel IP Softphone 2050
• Nortel Mobile Voice Client 2050
• IP Phone 1120E
• IP Phone 1140E
• IP Phone 1150E
Naming of existing IP Phone TN Types is changed to be consistent with
latest IP Phone naming convention. Below is a table of Rls 4.5 and Rls 5.0
IP Phone TN Types. You can no longer use old names in the overlays, so
when the system administrator tries to use any of the old names, new SCH
message is printed.
Table 4
New IP Phone TN type naming convention
IP Phone Model Name CS 1000 Release 4.5 TN
Type CS 1000 Release 5.0 TN Type
IP Phone 2001 i2001 2001P2
IP Phone 2002 Phase I i2002 2002P1
IP Phone 2002 Phase II i2002 2002P2
IP Phone 2004 Phase 0/1 i2004 2004P1
IP Phone 2004 Phase II i2004 2004P2
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.