Nortel Networks NN43001-314 - Manual (Page 199)

Adding a CS 1000 Release 5.0 Branch Office to a Branch Office with a previous software release 199
4 Install the new CS 1000 Release 5.0 Branch Office as described in
"Implementation summary" (page 194) .
—End—
Upgrade main office without IP Phone firmware upgrade
To upgrade the main office to CS 1000 Release 5.0 without upgrading the IP
Phone firmware in the existing CS 1000 4.0 or CS 1000 4.5 branch offices:
Step Action
1 At the main office:
a. Upgrade the Call Server software to CS 1000 Release 5.0.
b. Upgrade the main office Signaling Server software to CS 1000
Release 5.0 with the Automatic Firmware Upgrade set.
c. Reconfigure the main office Signaling Server to configure the
NRS.
d. Upgrade the main office Voice Gateway Media Cards to CS 1000
Release 5.0.
2 At each existing CS 1000 Branch Office:
a. If necessary, execute the isetResetAll command on the MG
1000B Signaling Server(s) or Voice Gateway Media Card(s).
3 Install the new CS 1000 Release 5.0 Branch Office, as described in
"Implementation summary" (page 194) .
—End—
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.