Rack-mounting, Figure 79 snapped-in bezel door, Danger – Nortel Networks NN43001-314 User Manual
Page 232
232
MG 1000B platform hardware installation
When the door is attached to the Signaling Server and rack-mount
apparatus, it appears as shown in
.
Figure 79
Snapped-in bezel door
—End—
Rack-mounting
Read the following warnings carefully before installing the Signaling Server
in the rack.
DANGER
DANGER OF ELECTRIC SHOCK
DISCONNECT AC POWER: Completely disconnect the the
Signaling Server from any AC power source before performing this
procedure. Pressing the Power button DOES NOT turn off power
to this Signaling Server. Some circuitry in the Signaling Server
may continue to operate even though the front panel Power button
is off. Failure to disconnect the Signaling Server from its AC power
source can result in personal injury or equipment damage.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.