Nortel Networks NN43001-314 - Manual (Page 208)

208 Upgrading to CS 1000 Release 5.0
Upgrading to CS 1000 Release 5.0
If the main office has not already been upgraded to CS 1000 Release 5.0,
begin with
step 1 . If the main office has been upgraded to CS 1000 Release
5.0, skip to step 2 .
Step Action
1 At the main office:
a. Upgrade the Call Server software to CS 1000 Release 5.0.
b. Upgrade the main office Signaling Server(s) software to CS 1000
Release 5.0 with the Automatic Firmware Upgrade set.
c. Configure the main office Signaling Server(s) to access the NRS.
d. Upgrade the main office Voice Gateway Media Card(s) to CS
1000 Release 5.0.
2 At each existing CS 1000 4.0 or CS 1000 4.5 Branch Office:
a. Upgrade the Small System Controller software to CS 1000
Release 5.0.
b. Upgrade the MG 1000B Signaling Server software to CS 1000
Release 5.0 with the Automatic Firmware Upgrade set.
c. Configure the MG 1000B Signaling Server(s) to access the NRS.
d. Upgrade the MG 1000B Voice Gateway Media Card(s) to CS
1000 Release 5.0.
3 Execute the umsUpgradeAll command on the main office
Signaling Servers, or Voice Gateway Media Cards, if necessary.
—End—
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.