Nortel Networks NN43001-314 - Manual (Page 146)

146 Alternative Call Routing for Network Bandwidth Management
Command Description
Enable Alternative Call Routing for NBWM, where:
Input zone number (0-255).
Configure the Branch Office zone using LD 117 at the main office.
LD 117 - Configure Alternate Prefix number for a particular zone and the All Calls option,
if desired.
Command Description
CHG ZALT []
Change ALTPrefix number for zone, where:
Input zone number (0-255).
Configure the Branch Office zone using LD 117 at the main office.
A digit string, of up to 7 digits, added to the start of the dialed
number, if the call will not be routed through the WAN (due to lack of
bandwidth, poor QoS, or feature is configured for all calls).
[] Allow or Deny Alternative Call Routing for all calls, where:
• (NO) = deny
• YES = allow
LD 117 - Print Alternate Prefix number for a particular zone.
Command Description
PRT ZALT
Print the ALTPrefix assigned to a particular zone and if the feature operates for all calls from
that zone, where:
Input zone number (0-255).
If you do not input a zone number, the system prints the information
for all configured zones.
Sample printout
# ZALT Alternate Prefix All Calls
Alarms
Suppression
Time
10 ENL 100 YES 50
11 ENL 101 YES 0
12 DIS 102 NO 1000
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.