Nortel Networks NN43001-314 - Manual (Page 255)

255
Branch Office configuration
Contents
This section contains information on the following topics:
"Configuring the Branch Office" (page 255)
"Summary of steps" (page 255)
"Configuring the Media Cards" (page 256)
"Configuring the trunks and lines" (page 256)
"Zone parameters" (page 256)
"Adding the Branch Office endpoints to the NRS database" (page 260)
Configuring the Branch Office
After connecting the MG 1000B Core to the network and configuring the
system user names and passwords (see
"MG 1000B software installation"
(page 239) ), complete the configuration.
Summary of steps
Perform the following steps to configure a Branch Office:
Step Action
1 Configure the ELAN network interface IP address (see Procedure 21
"Configuring the ELAN network interface IP address" (page 246) ).
2 Configure the Branch Office dialing plan (see "Dialing plan
configuration" (page 291) ).
3 Configure Media Cards as voice gateways (see "Configuring the
Media Cards" (page 256) ).
4 Configure trunks and lines (see ) CS 1000E Installation and
Configuration NTP..
5 Configure IP Phones (see "Installing and configuring IP Phones"
(page 264) ).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.