Nortel Networks NN43001-314 - Manual (Page 66)

66 Bandwidth Management
Figure 14
Zones web page
Configuration using LD 117
A new Bandwidth Management zone is configured in LD 117 using the
NEW ZONE command. An existing zone can be modified using the CHG
ZONE command.
LD 117 Configure a new or existing Bandwidth Management zone.
Command Description
NEW | CHG ZONE [
]
Configure a new zone (NEW) or change (CHG) an existing
zone, where:
• zoneNumber = 0-255
• intraZoneBandwidth = Available intrazone bandwidth
(Kbit/s); Nortel recommends this value be set to the
maximum value.
• intraZoneStrategy = BB (Best Bandwidth) or BQ (Best
Quality); Nortel recommends this value be set to BQ.
• interZoneBandwidth =
— For Call Server zone = Maximum bandwidth usage (in
Kbit/s) allowed between peer Call Servers
— For Virtual Trunk zones = 1000000 (Kbit/s)
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.