Nortel Networks NN43001-314 User Manual
Page 83
Adaptive Network Bandwidth Management
83
Command
Description
Change the QoS Response Time Interval while alarms are not coming, to
increase the Sliding Maximum for the identified zone, where:
•
Zone = 1-255
•
Interval = interval in minutes = 1-(5)-120
CHG ZQUAT
Change the QoS Unacceptable Alarm Threshold value for the identified zone,
where:
•
Zone = 1-255
•
Thres = threshold value = 1-(75)-99
When the zone-to-zone QoS value drops below the threshold value, the alarm
is presented. This value must be below the value of ZQWAT.
CHG ZQWAT
Change the QoS Warning Alarm Threshold value for the identified zone, where:
•
Zone = 1-255
•
Thres = threshold value = 1-(85)-99
When the zone-to-zone QoS value drops below the threshold value, the alarm
is presented. The value for ZQWAT must be higher than the value of ZQUAT.
NEW ZONE
•
zoneNumber = 1-255
•
intraZoneBandwidth = 1000000 (Mbit/s)
•
intraZoneStrategy = BQ (Best Quality)
•
interZoneBandwidth = 1000000 (Mbit/s)
•
interZoneStrategy = intrazone preferred strategy
— Best Quality = BQ
— Best Bandwidth = BB
•
zoneIntent = type of zone, where:
— MO = Main office zone
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.