Enabling codecs – Nortel Networks NN43001-314 User Manual
Page 63
Configuring Bandwidth Management parameters
63
3
Choose unique Bandwidth Zone numbers for the Virtual Trunks in
the network.
4
Choose the codecs that will be enabled on each Call Server.
5
Identify what the interzone codec strategy will be (BB-Best
Bandwidth or BQ-Best Quality) for each zone in the network.
6
Identify what the intrazone codec strategy will be (BB-Best
Bandwidth or BQ-Best Quality) for each zone in the network.
7
Calculate the bandwidth available for intrazone calls for each zone
in the network.
8
Calculate the bandwidth available for interzone calls for each zone
in the network.
9
Calculate the bandwidth available for intrazone calls
—End—
Enabling codecs
In Element Manager, select the codecs that will be enabled for calls on the
Call Server, and define the associated parameters, such as payload size.
Select the Nodes: Servers, Media Cards web page under IP Network.
Then click Edit on the Node Configuration web page, and click VGW and
IP phone codec profile. Select an existing codec or configure a new
one in the VGW and IP phone codec profile section, shown in
"Configuring a codec" (page 64)
. Refer to IP Peer Networking: Installation
and Configuration (NN43001-313) for full instructions on configuring a
codec.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.