Telephone options, Procedure 28 changing the scpw, Procedure 29 using the telephone options feature – Nortel Networks NN43001-314 User Manual
Page 282: Procedure 28, Changing the scpw, Procedure 29, Using the telephone options feature, And to ip phones
282
MG 1000B telephones
Changing the SCPW
Use
Procedure 27 "Installing IP Phones through overlays" (page 279)
to
change the SCPW of a telephone at any time.
Procedure 28
Changing the SCPW
Step
Action
1
Dial the SCPC code followed by the current Station Control
Password.
An FFC tone is given at this point.
2
Enter the new password.
The new password must be the same length as SCPL.
3
Wait for the FFC tone and enter the new password again.
If the new password is accepted, another FFC tone is given. If the
new password is not accepted, an overflow tone is given.
—End—
Telephone Options
The IP Phone Options feature is described in IP Phones Fundamentals
(NN43001-368).
Procedure 29
Using the Telephone Options feature
Step
Action
This procedure explains how to use IP Phone Options features. The IP
Phone has been configured using Branch User Config and is operating
in Normal Mode.
1
Press the Services key (the key with the Globe icon).
The Options menu is displayed (see
).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.