Nortel Networks NN43001-314 User Manual
Page 289
Analog and digital devices in the Branch Office
289
Digital telephones at a Branch Office can be configured using:
•
Set-Based Installation (not for M3900-series telephones)
•
Overlays (locally or remotely through a modem or Ethernet connection).
For more information, see
Procedure 27 "Installing IP Phones through
•
TM 3.01
Digital devices supported by the Branch Office feature include digital
telephones, consoles, and a CallPilot Mini or CallPilot 201i.
M3900-series digital telephones also have a Virtual Office feature. This
feature is not network-wide, like the Virtual Office feature on the IP Phones.
For an M3900-series telephone, a Virtual Office login enables a registration
to another TN within the MG 1000B CP PM.
Activating analog (500/2500-type) and digital telephones
Activate each telephone using the Automatic Set Configuration feature. This
feature is described in . If the Branch Office is a converted Small System,
refer to Communication Server 1000M and Meridian 1 Small System
Installation and Commissioning (NN43011-310).
To program a telephone with the data feature, configure the Data Class of
Service parameter in LD 11. Refer to Software Input Output Administration
(NN43001-611).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.