Nortel Networks NN43001-314 User Manual
Page 104
104
Bandwidth Management
Figure 36
Call flow for Scenario 1 - call to remote Branch Office (destination side)
1. Main office B determines that LOC 444 is to a local Branch Office with
prefix 225. The system transmits 225-444-3456 to the NRS. The NRS
checks its provisioning, and determines that this call goes to Branch
Office B1.
2. The main office sends the call to 225-444-3456 to the Branch Office.
The Branch Office deletes the prefix, discovers the call is to its HLOC,
deletes the HLOC, and rings set 3456.
Summary of provisioning procedures for Tandem Bandwidth
Management
Use
Procedure 3 "Provisioning Tandem Bandwidth Management" (page
to provision the network.
Step
Action
1
Enter the main office Gateway endpoint identifier in the Tandem
Endpoint field for each Branch Office gateway configured on the
NRS. This provides tandeming for outbound calls from a Branch
Office through its main office. See
.
2
Plan the gateway routing prefixes, if not already done. At least one
prefix is needed per Branch Office, although any branch offices
that have a prefix for ESA "911" calls does not necessarily require
another. (These prefixes will be SPN - Special Number - entries.)
See
.
3
Provision the NRS to send all calls to a LOC without a gateway
routing prefix to the main office of that LOC, or to the main office
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.