Nortel Networks NN43001-314 - Manual (Page 358)

358 Maintenance and diagnostics
ATTENTION
IMPORTANT!
The notification level for a Branch Office zone must be configured the same at
both the main office and the Branch Office.
LD 117 Change/print PVQ notification levels.
Command Description
CHG ZQNL ALL
Change the notification level for all zones.
CHG ZQNL
Change the notification level for the specified zone.
PRT ZQNL ALL Print a table of the notification level for all zones.
PRT ZQNL
Print a table of the notification level for the specified zone.
Print PVQ statistics
LD 117 contains a command to print PVQ statistics for the Branch Office
zone. For more information on PVQ, refer to
"Proactive Voice Quality
management" (page 188) and Converging the Data Network with VoIP
(NN43001-260).
LD 117 PVQ statistics.
Command Description
PRT ZQOS
Print the PVQ statistics for the Branch Office zone.
Print inventory
The inventory (generated in LD 117) is for all IP Phones registered to the
Call Server or CP PM. This includes IP Phones registered by a Virtual Office
and Branch Office logins at the main office Call Server. At the CP PM,
inventory only includes IP Phones registered at the MG 1000B MGC, not all
the IP Phones physically located at the Branch Office.
To get an inventory of all IP Phones at a Branch Office, execute the INV
GENERATE command at the Branch Office with all Branch Users in Local
Mode.
ATTENTION
Do this only during a maintenance window.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.