Nortel Networks NN43001-314 - Manual (Page 115)

Network using CDP only 115
Figure 43
Call flow for Scenario 2 - call to remote Branch Office (destination side)
1. The main office B deletes the HLOC, and determines that this is to a
local Branch Office. The system transmits 3456 to the NRS. The NRS
checks its provisioning, and determines that for this CDP region this call
goes to Branch Office B1.
2. The main office sends the call to 3456 to the Branch Office. The Branch
Office rings set 3456.
Network using CDP only
The following section provides general details of network setup.
Figure 44 "Scenario 3 - full CDP network" (page 116) shows a full CDP
network configuration.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.