Maintenance commands, Procedures, Procedure 1 – Nortel Networks NN43001-314 User Manual
Page 67
Configuring Bandwidth Management parameters
67
Command
Description
•
interZoneStrategy = BB (Best Bandwidth) or BQ (Best
Quality); Nortel recommends this value be set to BB to
conserve interzone bandwidth.
•
zoneIntent = type of zone, where:
— MO = Main office (Call Server) zone
— BMG = Branch Media Gateway (for Branch Office
zones)
— VTRK = Virtual Trunk zone
•
zoneResourceType = resource intrazone preferred
strategy, where:
— shared = shared DSP channels (default)
— private = private DSP channels
In CS 1000 Release 4.5, the zones that were described with
BMG designator stay with BMG one, all the other zones
are provided with MO designator. It is possible to update
ZoneIntent using CHG ZONE command
Maintenance commands
Maintenance commands can be run from Element Manager or LD 117.
Maintenance using Element Manager
The PRT INTRAZONE and PRT INTERZONE commands are available in
Element Manager from the Zones web page, shown in
. To access these commands, follow the steps in
1 "Printing intrazone and interzone statistics for a zone" (page 67)
.
Procedure 1
Printing intrazone and interzone statistics for a zone
Step
Action
1
Select IP Network > Zones from the navigator.
The Zones web page opens, as shown in
.
2
Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page opens, as
shown in
Figure 15 "Maintenance Commands for Zones web page"
. This page lists all the configured zones.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.