IBM INFO PRINT 3000 - Manual (Page 77)

Operate Pull-Down Menu
Figure 11 shows the selections available on the Operate pull-down menu.
Ready
Makes the complete system (both printers) Ready when it is in duplex
mode. It also makes the individual printer Ready when it is in simplex or
dual simplex mode. If pages are waiting to be printed and the system or
printer is online to the host, printing begins.
Stop Finishes the page that is currently printing. It then makes the complete
system (both printers) Not Ready in duplex mode or the individual printer
Not Ready in simplex or dual simplex mode.
Printer Status...
Displays status information about the system or printer. See “Status
Messages” on page 278 for more information.
Cancel Job
Lets you cancel the job that is currently printing. In simplex or dual
simplex mode, only the individual printer must be in a Not Ready state.
See “Canceling a Job” on page 78 for more information.
Clear Buffers
Clears the print buffers. (You must make the printer Not Ready before you
select Clear Buffers.) This procedure allows the host to use PSF Forward
and Backward commands.
Thread/Align Forms...
Establishes the front-to-back synchronization in a two-printer system. This
procedure is available only in duplex mode. See “Thread/Align Forms” on
page 152 for more information.
Operate Configure Analyze Options Help
Ready Check Reset NPRO Cancel Job
HC6OG089
Ready
Stop
Printer Status...
Cancel Job
Clear Buffers
Thread/Align Forms...
NPRO
NPRO Page
Shutdown/Restart
Figure 11. Operate Pull-Down Menu
Chapter 5. Task Summary
45