IBM INFO PRINT 3000 - Manual (Page 58)

Puller Control Lever
The puller lever is on the left side of the input area. When you press the lever,
pressure is released on the scuff and backup rollers inside the fuser area. The lever
is spring-loaded, so pressure returns to the scuff and backup rollers when you
release the puller lever.
Fuser Entry Area
After they receive print images, the forms pass through the fuser entry area toward
the fuser.
In the fuser area, heat and pressure from the fuser heat-roll bond the print images
onto the forms.
26
InfoPrint 3000 Operator’s Guide