IBM INFO PRINT 3000 - Manual (Page 54)

Forms Input and Transfer Station Area
You load forms that are ready for processing into the printer at the forms input
area. The developer mix bottle and drain hose are also in the forms input area.
In the transfer station area, print images are transferred from the photoconductor
drum to the forms that are traveling through the printer. “Printer Control Panel”
on page 23 describes the printer control panel in detail.
1 Transfer station
2 Developer area
3 Printer control panel
4 Forms input area
5 Static brushes
6 Tension arm
22
InfoPrint 3000 Operator’s Guide